I. Chinese Standards

1. Chinese National Standards

GB/T2524-2007 titanium sponge

GB/T3620-2007 Titanium and titanium alloy grades and chemical composition

GB/T15073-1994 cast titanium and titanium alloy grades and chemical composition

Titanium and titanium alloy sheet

Titanium plates for plate heat exchangers

GB/T3622-1999 Titanium and titanium alloy tape and foil

Titanium and titanium alloy wire

GB/T3624-2007 Titanium and titanium alloy pipe

Titanium and titanium tubes for heat exchangers and condensers

Titanium and titanium alloy bars

Titanium and titanium alloy cakes and rings

Titanium - stainless steel composite plate

Titanium and steel composite plate

Titanium and titanium alloy castings

GB/T5168-1985 Test method for microstructure of two-phase titanium alloys at high and low magnification

Terminology for titanium and titanium alloys

GB/T8755-2008 Metallographic map of terms for titanium and titanium alloys

Titanium and copper composite rod

Titanium and titanium alloy materials for surgical implants

GB/T12417-1990 General specification for surgical metal implants

Methods for chemical analysis of sponge titanium, titanium and titanium alloy GB/T5193-2007 Ultrasonic flaw detection of titanium and titanium alloy processed products

Method for ultrasonic examination of titanium and titanium alloy pipes

GB/T12969.2-1991 Method for eddy current inspection of titanium and titanium alloy pipes

Titanium and titanium alloys meet the technical conditions of steel plate welding

Sintered titanium filter elements and materials

GB/T8180-2007 Titanium and titanium alloy processing products packaging, marking, transportation and storage GB/T6612-1986 important use of TA7 titanium alloy sheet

GB/T6613-1986 TC4 titanium alloy sheet for important use

GB/T1216-1992TA5 titanium alloy welding technical conditions

2. Chinese National military Standards

GJB2218-1994 Specification for titanium and titanium alloy bars and forging billets for aeronautical use

Specification for titanium and titanium alloy rods (wires) for fasteners GJB2219-1994

GJB2220-1994 Specification for titanium alloy cakes and ring billets for aeroengines

GJB2505-1995 Specification for titanium and titanium alloy plates and strips for aeronautical use

GJB2744-1996 Specification for titanium and titanium alloy bars and free forgings and die forgings for aviation use GJB2896-1996 Specification for titanium and titanium alloy investment precision castings

GJB2921-1997 Specification for TC4 titanium alloy sheets for superplastic forming

GJB3763A-2004 Heat treatment of titanium and titanium alloys

Forging cake material of TC4 titanium alloy for aerospace industry

GJB493-1988 Titanium alloy TC4 bar for aero-engine blades

GJB494-1988 Titanium alloy TC11 bar for aero-engine blades

GJB495-1988 TA7-D titanium alloy bars for ultra low temperature

TA5-A titanium alloy forgings for submarine GJB943-1900

GJB944-1900TA5-A titanium alloy sheet

GJB1169-1991 Specification for titanium alloy rings for aerospace applications

Technical specification for rivets in titanium alloy GJB1205-1991TB2-1

GJB1538-1992 Specification for TC4 titanium alloy bars for structural parts of aircraft

2. American Standards

1, American Society for Testing and Material standards

Titanium sponge ASTMB229-2001

Astmb 265-2005 Titanium and titanium alloy belts, sheets and plates

Titanium and titanium alloy seamless tubes and welded tubes (replaced by titanium and titanium alloy seamless tubes, Titanium and titanium alloy welded tubes B862-2002)

Astm M 338-2005A Seamless and welded tubes for condenser and heat exchangers in titanium and titanium alloys

Astmb 348-2005 Titanium and titanium alloy rods and blanks

Astm M 363-2004 Seamless and welded fittings of non-alloyed titanium and titanium alloys

Astm D 367-2004 Titanium and titanium alloy castings

ASTMB861-2002 Titanium and titanium alloy seamless tube

Astmb 862-2002 Titanium and titanium alloy welded pipes

ASTMB381-2005 Titanium and titanium alloy forgings

ASTMF67-2000 Pure titanium for surgical implants

ASTMF136-2002a surgical implants were fabricated with Ti-6Al-4VELI

ASTMF620-2002 α+β phase titanium alloy forgings for surgical implants

ASTMF1108-2002 Ti-6Al-4V castings for surgical implants

ASTMF1295-2001 Surgical implants are fabricated from Ti-6Al-7Nb materials

Pure titanium wire

ASTMF1472-2002a surgical implants are fabricated from Ti-6Al-4V materials

ASTMF1713-1996 Surgical implants processed with Ti-13Nb-13Zr

ASTMF1813-2001 Surgical implants were fabricated with Ti-12Mo-6Zr-2Fe

Shape memory alloys for medical devices and surgical implants

2, American Society of Mechanical Engineers standards

ASME Part VIII: Chapter 1 Pressure Vessels (Basic Code)

American Technical Standard for Aerospace materials

AMS4900-2001 Titanium sheet, strip and plate (annealed state)(380Mpa)

Titanium sheet, strip and plate (annealed state)(485Mpa)

AMS4902-2001 Titanium Sheet, strip and plate (annealed state)(275Mpa)

AMS4907-2001 Low Clearance Elemental Ti-6Al-4V Alloy Sheets, Strips and Plates (annealed state)

AMS4910-2003Ti-5Al-2.5Sn Alloy Sheet, Strip and Medium Thickness (annealed)

AMS4911-2003Ti-6Al-4V Sheet, Strip and Medium Thickness (annealed state)

AMS4921-2004 Titanium Bars, forgings and rings (annealed state)(485Mpa)

AMS4924-2002 Ti-5Al-2.5Sn alloy bars, forgings and rings (annealed state), Element grade, Ultra Low Clearance

AMS4926-2001Ti-5Al-2.5Sn Rods and Rings (annealed state)(760Mpa)

Alloy AMS4928-2001Ti-6Al-4V Bars, forgings and rings (annealed state)(825Mpa)

AMS4941-2003 titanium welded pipe

AMS4942-2001 Seamless Titanium Tube (annealed state)(275Mpa)

AMS4930-2001 Bars, forgings and rings of Ti-6Al-4V Alloy, Element grade, Ultra-low Clearance (annealed state)

AMS4951-2003 Industrial pure titanium welding wire

AMS4954-2003Ti-6Al-4V alloy welding wire

AMS4965-2002Ti-6Al-4V alloy bars, forgings and rings (solution and stabilization treatment)

Ti AMS4966-2003-5, 2.5 Sn forgings

AMS4967-2001 Heat-treatable Alloy Ti-6Al-4V Bars, forgings and rings (annealed state)

ASM4972-2003Ti-8Al-1Mo-1V alloy bars and rings (solution and stabilization treatment)

ASM4973-2002Ti-8Al-1Mo-1V Titanium alloy forgings (Solution and stabilization treatment)

ASM4975-2003Ti-6Al-2Sn-4Zr-2Mo alloy bars and rings (solution and stabilization treatment)

ASM4983-2002Ti-10V-2F-3Al Forgings (Solution treatment and Aging)

ASM4985-2003 Forgings of Ti-6Al-4V alloy cast by paraffin or graphite compaction

ASM4991-2002Ti-6Al-4V alloy Precision forgings (annealed state)

ASM2380-2003 High quality titanium alloy accreditation and control

3. American military standards

Titanium and titanium alloy sheet, strip and plate

MIL-T-9047-2005 Titanium and titanium alloy bars and forging billets

MIL-R-81588-1986 Titanium and titanium alloy round rod and wire

MIL-F-83142-2000 Titanium and Titanium alloy forgings (Premium grade)

MIL-T-46077 titanium alloy weldable armor plate

MIL - T - 13405 titanium powder

MIL-T-46035-1989 High strength titanium alloy, deformation material

MIL-T-81556-1996 Titanium and titanium alloys - Round rods, bars, extruded parts with special shaped surfaces

MIL-T-81200 Heat treatment of titanium and titanium alloys

Third, the British standard

BS2TA1:1974 Sheets and strips of pure titanium for industrial use (Tensile strength 290-420 mpa)

BS2TA2:1973 Sheets and strips of pure titanium for industrial use (Tensile strength 390-540Mpa)

BS2TA3:1973 Industrial pure titanium bars and profiles for machining (Tensile strength 390-540Mpa)

BS2TA4:1973 Forging billet of industrial pure titanium (Tensile strength 390-540Mpa)

BS2TA5:1973 Forging billet of industrial pure titanium (Tensile strength 390-540Mpa)

BS2TA6:1973 Sheets and strips of pure titanium for industrial use (Tensile strength 570-730Mpa)

BS2TA7:1973 Industrial pure titanium bars and profiles for machining (tensile strength 540-740Mpa)

BS2TA8:1973 Forging billet of industrial pure titanium (Tensile strength 540-740Mpa)

BS2TA9:1973 Forgings of pure titanium for industrial use (tensile strength 540-740Mpa)

BS2TA10:1974 Sheet and strip of titanium-aluminum-Vanadium alloy (Tensile strength 960-1270Mpa)

BS2TA11:1974 Bars and profiles of Titanium-aluminum-Vanadium alloys for machining (Tensile strength 900-1160Mpa)

BS2TA12:1974 Titanium - Aluminium-Vanadium alloy forging billet (Tensile strength 900-1160Mpa)

BS2TA13:1974 Titanium, Aluminum-Vanadium alloy forgings (tensile strength 900-1160Mpa)

BS2TA21:1973 Sheet and strip of titanium-Copper alloy (Tensile strength 540-770Mpa)

BS2TA22:1973 Titanium-Copper alloy bars and sections for machining (Tensile strength 540-770Mpa)

BS2TA23:1973 Forging billet of titanium-copper alloy (Tensile strength 540-770Mpa)

BS2TA24:1973 Forgings of titanium-copper alloys (Tensile strength 540-770Mpa)

BS2TA28:1974 Titanium, Aluminium-Vanadium alloy forging billet and wire (tensile strength 1100-1300 mpa)

BSTA38:1993 Bars of titanium-aluminum-Molybdenum-Tin-Si-carbon alloys for machining (Tensile strength 1250-1420Mpa)

BSTA39:1993 Forging billet of titanium-aluminum-Molybdenum-Tin-Si-carbon alloy (Tensile strength 1250-1420Mpa)

BSTA40:1993 Titanium - Aluminum-Molybdenum - Tin-Silicon - Carbon alloy bars for machining (tensile strength 1250-1375Mpa)

BSTA41:1993 Forging billet of Ti-Al-Al-Mo-Tin-Si-C alloy (Tensile strength 1250-1375Mpa)

BSTA42:1993 Forgings of titanium - Aluminum-Molybdenum-Tin-Silicon-carbon alloys (Tensile strength 1250-1375Mpa)

BSTA45:1993 Bars and profiles of Titanium-Aluminum-Molybdenum-Tin-Silicon alloys for machining (Tensile strength 1100-1280 mpa)

BSTA46:1993 Bars and Profiles of Titanium-Aluminum-Molybdenum-Tin-Silicon alloys for machining (Tensile strength 1050-1220 mpa)

BSTA47:1993 Forging billet of titanium-aluminum-Molybdenum-Tin-silicon alloy (Tensile strength 1050-1220 mpa)

BSTA48:1993 Forging billet of titanium-aluminum-Molybdenum-Tin-silicon alloy (Tensile strength 1050-1220 mpa)

BSTA49:1993 Bars and Profiles of Titanium-Aluminum-Molybdenum-Tin-Silicon alloys for machining (Tensile strength 1000-1200Mpa)

BSTA50:1993 Forging billet of titanium-aluminum-Molybdenum-Tin-silicon alloy (Tensile strength 1000-1200Mpa)

BSTA51:1993 Forgings of titanium, Aluminum, Molybdenum, Tin-silicon alloys (Tensile strength 1000-1200Mpa)

Sheet and strip of Titanium-Copper alloy (Tensile strength 690-920Mpa)

BSTA56:1993 Thick plates of titanium-aluminum-Vanadium alloy (Tensile 895-1150Mpa)

BSTA57:1993 Thick plates of titanium, Aluminum, Molybdenum, Tin-Silicon (Tensile strength 1030-1220 mpa)

BSTA58:1993 Thick plates of titanium - copper alloy (Tensile strength 520-640Mpa)

BSTA100:1973 Test and experimental methods for deformed titanium and titanium alloys

BS5500:1997 Flameless fusion welding of pressure vessels

CP3003 pressure vessel lining and chemical equipment

4. Russian Standard

Titanium sponge Γ OCT17746-79

ΓOCT19807-91 Deformed titanium and titanium alloy grades

ΓOCT22178-90 Titanium and titanium alloy sheet

ΓOCT23755-87 thick plates of titanium and titanium alloys

ΓOCT21945-82 hot rolled seamless titanium tube

ΓOCT22897-86 cold rolled seamless titanium tube

ΓOCT24890-81 welding titanium tube

ΓOCT26492-85 Titanium and titanium alloy rolled bar

ΓOCT27265-87 Titanium and titanium alloy filling wire specification

5. Japanese Standard

Titanium sponge JISH2151-1983

Titanium and titanium alloy plates and bands

Titanium and titanium alloy seamless tube

Tubes for titanium and titanium alloy heat exchangers

Welding pipes of titanium and titanium alloys

Titanium and titanium alloy rods

Titanium and titanium alloy forgings

Titanium and titanium alloy wire

JIS7505 titanium castings

6. German Standard

Din 17850-1990 Chemical composition of industrial pure titanium pressure processed materials

Din 17851-1990 Chemical composition of titanium alloy pressure processed materials

Din 17860-1990 Titanium and titanium alloy plates and bands

Din 17861-1990 Titanium and titanium alloy seamless pipe

Din 17862-1990 Titanium and titanium alloy rod DIN17863-1973 Titanium and titanium alloy wire

DIN17864-1993 Titanium and titanium alloy forgings

Casting titanium DIN17865-1990

Din 17866-1990 Welding pipes of titanium and titanium alloys

DIN1737T1-1984 Chemical composition and technical conditions of titanium and titanium palladium alloy filling materials

Din 1737T2-1988 Test block, specimen, mechanical and technological properties of fully welded metals filled with titanium and titanium palladium alloys

Semi thread of DIN931 hexagon bolt

DIN933 outer hexagon bolt, full thread

DIN931 outer hexagon nut

DIN125 ordinary gasket

DIN127 spring gasket

7. French Standards

NFL21-1101975 Pure titanium T40 forging bar billet

NFL21-2701981TA6V rod for rivet wire

NFL14-6011984TA6V forging bar

NFL14-6021984 ta6v forgings

NFL14-6031984TA6V forging bar blank

NFL14-6041984 ta6v forgings

Ta6vzr5d NFL14-6111984 bar

NFL14-6121984 ta6vzr5d forgings

ISO International Standard (Titanium for Surgical Implants)

Pure titanium ISO5832-2-1999

ISO5832 ti - 3-1996 Ti-6Al-4V processing material

Ti ISO5832-11-1994 Ti-6Al-7Nb processing materials

The above are all the national standards, Shaanxi Zhuo Hang Xin metal Materials Co., LTD., specializing in the production of titanium and titanium alloy, titanium plate, titanium rod, titanium wire, titanium pipe, titanium processing, medical titanium and other non-ferrous metal development, production and sales.