The density of titanium is 4.506-4.516g/cm^3, melting point is 1668, boiling point is 3535. Therefore Titanium have low weight, excellent high strength and nonmagnetic festures, low density, excellent corrosion resistance features, high specificate strength and high temperature resistance features, so it is widely used in chemical industry field, medical field, electronics manufacture, mechanical parts field, automobile industry, and aerospace field, etc.
Name | Titanium Tube & Pipe |
Standard
| ASTM B338/ASME SB338, ASTM B337/ASME SB337, ASTM B861/ASME SB861, ASTM B862/ASME SB862,AMS4911,AMS4928 |
Material Grade | Gr1, Gr2, Gr4, Gr7, Gr9, Gr11, Gr12, etc |
Length
| ≤14000mm |
Size(mm)
| Diameter 3-508mm |
Section shape
| Round / Square |
Tolerance
| a) Outer Diameter: +/- 0.01mm |
b) Thickness: +/- 0.01mm |
c) Length: +/- 0.1mm |
Surface | Pickling, annealing, polishing, bright. |
Feature
| 1.Low Density and High Strength
2.Excellent Corrosion Resistance
3.Good resistance to effect of heat
4.Excellent Bearing to cryogenic property
5.Nonmagnetic and Non-toxic
6.Good thermal properties
7.Low Modulus of Elasticity |
Test | Squash test, extended test, water pressure test, crystal rot test, heat treatment, NDT |
Titanium Tubes Production Process:
A method for producing and processing titanium tubes, the processing method is as follows:
Step 1: Forging the titanium ingot into a tube blank, and performing surface treatment on the tube blank;
Step 2: After the surface treatment, the tube blank is rolled into a titanium tube for the first time, and the oil is removed after the first rolling;
Step 3: Carry out the first pickling after degreasing, wash the titanium tube after pickling, dry it after washing, annealing after drying, and straighten the titanium tube after annealing;
Step 4: Pickling the titanium tube again. After the pickling, rinse the titanium tube, dry the titanium tube after washing, and then roll the titanium tube for the second time after drying. The rolled titanium tube The finished product is degreasing, pickling after degreasing, washing the titanium tube after pickling, washing and drying, annealing after drying, and straightening the titanium tube after annealing;
Step 5: Pickling the titanium tube after straightening, repeat the above steps, and obtain the finished product after six times of rolling.
Application: (Titanium tube/tube)
1. Heat exchanger and condenser
2. Desalination industry
3. Chemical industry
4. Electroplating equipment
5. Precision instruments
6. Environmental protection equipment
7. The automobile industry
8. Healthcare and sports
9. Power industry
