0.4mm to 60mm thick Ti6Al4V titanium plate
Titanium plate characteristics
1. Titanium plate is the surface of the oxide film is equivalent to a good long-term wear-resistant release agent, the use of titanium plate to save the separation agent, so that easy to peel off the plate, eliminating the pre-treatment process, The board is lighter than the copper plate.
2. Titanium plate of the life of copper plate is more than 3 times, according to operating conditions up to 10 to 20 years
3. With titanium plate made of electrolytic copper crystal structure dense, smooth surface, excellent quality.
4. Since the titanium plate does not need to apply the separating agent, it can avoid the pollution of the copper electrolyte.
5. To improve production capacity to reduce the cost of electrolytic copper production, which has a better economic benefits.
Applications:
metallurgy, electronics, medical, chemical, petroleum, medicine, aerospace and so on.
GR1,GR2,GR3,GR5,GR7,GR12,Gr23 BT1-00,BT1-0,BT1-2
Size:
T 0.5-5.0mm x W1000mm x L 2000-3500mm
T 6.0- 30mm x W1000-2500mm x L 3000-6000mm
T 30- 80mm x W1000mm x L 2000mm
Item name | l Titanium Plate,Titanium Sheet | |||
Standard | l ASTM B265 | |||
Grade | l Gr1,Gr2,Gr3,Gr4,Gr5,Gr7,Gr9,Gr12,Gr23 etc. | |||
Technology | l Hot rolling,Cold rolling | |||
Test | l Ultrasonic test(UT),X-ray test | |||
Thickness | l Foil: ≤ 0.3mm l Plate: > 0.3mm | |||
Standard specifications | l Width: <1.1m l Length: <2.2m Special specifications can be customized | |||
Manufacturing methods | l Hot rolling and cold rolling | |||
Annealing temperature: | l 700~785°C | |||
Size(mm) | Length | Width | Thickness | |
Hot rolling | 1000~4000 | 400~3000 | 4.1~60 | |
Cold rolling | 1000~3000 | 400~1500 | 0.3~6 | |
Titanium Grade 1 is an unalloyed, low strength titanium product containing low oxygen with high formability; this titanium grade is used in airframes, heat exchangers and desalination units.
Titanium Grade 2 is an unalloyed, medium strength titanium product. This titanium grade is used in airframes, aircraft engines and marine parts; good weldability and corrosion resistance are its distinguishing characteristics.
Titanium Grade 3 is an unalloyed, high strength, titanium product providing excellent corrosion resistance and good weldability. This titanium grade is primarily used in airframe and aircraft engine parts.
Titanium Grade 4 is the highest strength pure unalloyed titanium product. This titanium grade is used almost exclusively for
airframe, aircraft engine parts, marine, surgical implants, hydraulic tubing. Good formability and corrosion resistance are its
hallmark.
Titanium Grade 5 (6AL-4V)is an alloyed titanium product containing 6% Aluminum and 4% Vanadium; is a medium strength product. This titanium grade is predominantly used in airframe and turbine engine parts; and for use in surgical implants. Technical Info Titanium 6AL – 4V ELI is an alloyed titanium product containing 6% Aluminum and 4% Vanadium, ELI (Extra Low Interstitial).
6AL–2Sn–4Zr–2Mo (6-2-4-2)is an alloyed titanium product containing 6% Aluminum, 2% Tin, 4% Zirconium, 2% Molybdenum.
6AL–6V–2Sn (6-6-2)is an alloyed titanium product containing 6% Aluminum, 6% Vanadium, 2% Tin.
5AL–2.5Sn & ELI (5-2.5)is an alloyed titanium product containing 5% Aluminum and 2.5% Tin. Also ELI (Extra Low Interstitial).
8AL–1V–1Mo (8-1-1)is an alloyed titanium product containing 8% Aluminum, 1% Molybdenum and 1% Vanadium.
15V–3Cr–4AL–3Sn (15-3-3-3)is an alloyed titanium product containing 15% Vanadium, 3% Chromium, 4% Aluminum, 3% Tin.
Titanium Sheets and Plates